Product Description:
| Item | RE08120XX-V | |
| Type | Single Gang | |
| Output | 2-bit quadrature code | |
| Contact Rating | 1 mA @ 5 VDC | |
| Insulation Resistance | 100 megohms @ 250 VDC | |
| Dielectric Withstanding Voltage Sea Level | 300 VAC minimum | |
| Electrical Travel | Continuous | |
| Operating Temperature Range | -30℃ to +80℃ | |
| Storage Temperature Range | -40℃ to +85℃ | |
| Relative humidity | 63% to 67% | |
| Rotational Life | 30,000±200cycles | |
| IP Rating | Could be customized | |
| Mechanical Angle | 360° | |
| Detent torque | 80~250gf.cm | |
| Number of detents | Could be customized | |
| Shaft Strength (Push-Pull) | Pull:8.0 kgf, Push:8.0 kgf Min at 10 sec | |
| Terminals | Printed circuit board terminals | |
| Hardware | One flat washer and one mounting nut supplied with each encoder | |
| Switch | Without Switch | |
How to order?
Please refer to the drawings below and specify which shaft you need and the length of L, D and F, so that we could understand your requirement and make samples for you
 |
 |
Application:
 |
 |
 |
 |
 |
 |
Company introduction
 |
| LJV was focusing on supplying the spare parts of plastic and hardware for potentiometers and encoders since 1996, meanwhile, we have also devoted to R&D and manufacturing of potentiometers and encoders, and we are very confident that both our spare parts and finished products can reach customers’ requirements. |
 |
   |
 |
 |
Any questions, please feel free to contact me!
No comments:
Post a Comment